Putting it together

Assembly: fixing the circuit board.

This is a job which will require you to have a great deal of patience, and you may need someone to help, you will need a pair of long nose pliers. The first thing you need to do is to cut the bolts the correct so they can be located into the circuit board. When this is done the circuit board is placed inside the housing and the two small holes drilled into the back of the plastic should match up with the holes in the PCB. Into these holes you place the bolts and try to secure the nuts onto the bolts. Make sure that the switch is located so that you can switch the circuit on and off, if you can’t do this then the circuit is in the wrong way around – it needs to be fixed.


Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s

%d bloggers like this: